Bearing range
High-speed, heat-tolerant bearings for angle grinders, drills, rotary hammers and cutters.
Angle grinders, drills, rotary hammers and cutters run at very high speeds in dusty, hot conditions. Most use small deep groove bearings (60x, 62x, 60 and 62 series), often with C3 clearance. A noisy or hot tool is usually a worn bearing, and replacing it with a quality one adds years to the tool.
Power tools run fast and hot, so the right clearance and seal matter. We supply the bearings for common grinder, drill, hammer and cutter models, and can match a worn bearing from the tool itself.
| Bearing | Bore d | Outside D | Width B |
|---|---|---|---|
| 607 | 7 mm | 19 mm | 6 mm |
| 608 | 8 mm | 22 mm | 7 mm |
| 609 | 9 mm | 24 mm | 7 mm |
| 626 | 6 mm | 19 mm | 6 mm |
| 629 | 9 mm | 26 mm | 8 mm |
| 6000 | 10 mm | 26 mm | 8 mm |
| 6001 | 12 mm | 28 mm | 8 mm |
Brands
Genuine stock from SKF, FAG, NTN, NSK, KOYO, INA and HCH, and other manufacturers on request.
Questions
Yes. Bring the old bearing to our counter or WhatsApp us a photo of its markings, and we will give you the right replacement, usually from stock.
Yes. Mechanics, repair shops and individuals buy single bearings from us every day.
From the counter
No readable number on the old bearing? Measure the bore, outside diameter and width with a vernier caliper, then match them to the size chart. Here is how.
Read article: How to measure a bearing and find its numberThe numbers stamped on a bearing tell you its type, size, seals and clearance. Here is how to read them, so you order the right part the first time.
Read article: How to read a bearing number: 6204 2RS C3, decodedTwo bearings, same size, different letters. Here is what ZZ and 2RS actually change, and how to choose the right one for your machine.
Read article: ZZ or 2RS? Choosing between shielded and sealed bearingsSend it to us. We will tell you what it is, what it costs, and how soon it can be at your door.