Our range
Six core ranges on our shelves, all the major brands, and a sourcing network for anything that is not. Tap any part number to ask for a price.
Bores from 1.5 mm to 9 mm for instruments, small motors, dental handpieces and RC models.
Small in size but made to tight tolerances. We stock open, shielded and sealed miniatures in chrome steel and stainless, including flanged versions.
The workhorse of electric motors. Fast, quiet, and handles radial plus moderate axial loads.
The most widely used bearing type, and the bulk of what crosses our counter. Available open, with metal shields (ZZ) or rubber seals (2RS), and in normal or C3 clearance for motors.
60 · 62 · 63 · 64 · 618 · 619 · 160
For combined radial and axial loads: pumps, compressors, gearboxes and spindles.
Single-row, double-row and matched pairs. Tell us the arrangement (back-to-back, face-to-face or tandem) and the preload, and we will match it.
72 · 73 · 32 · 33 · 52 · 53
Self-aligning under heavy load and shaft misalignment, for conveyors, crushers, screens and fans.
Two rows of barrel rollers in a spherical outer raceway. Available with a cylindrical or tapered (K) bore, in normal, C3 and C4 clearance.
222 · 223 · 213 · 230 · 231 · 232 · 240
High radial load capacity at high speed, for electric motors, gearboxes, pumps and machine tools.
Single-row bearings in the NU, NJ, NUP and N designs, with pressed steel, polyamide or machined brass cages. SKF and FAG.
NU 2 · NU 3 · NJ 2 · NJ 3 · NUP 2 · NU 22 · NU 23
Two rows of balls on a spherical outer raceway, for shafts that bend or housings that do not line up.
Self-aligning ball bearings in the 12, 13, 22 and 23 series, with cylindrical or tapered bores. SKF and FAG.
Single-row ball bearings that carry axial load in both directions, in the QJ series.
QJ series four-point contact ball bearings with a split inner ring, for gearboxes, pumps and compressors. SKF.
Long thin rollers for high load in a small radial space: drawn cups, machined rings and cages.
HK and BK drawn cup bearings, NK and NA machined-ring bearings and needle roller cage assemblies. SKF and INA.
High-speed, heat-tolerant bearings for angle grinders, drills, rotary hammers and cutters.
Power tools run fast and hot, so the right clearance and seal matter. We supply the bearings for common grinder, drill, hammer and cutter models, and can match a worn bearing from the tool itself.
Built for axial loads on vertical shafts, crane hooks, screw jacks and marine drives.
Thrust ball bearings for light and moderate axial loads, and spherical roller thrust bearings for heavy loads with misalignment.
Cone-and-cup bearings for combined radial and axial loads in wheel hubs, axles, gearboxes and spindles.
Each bearing is a cone (the inner ring with its rollers and cage) and a separate cup (the outer ring). We supply metric series such as 302, 303, 320, 322 and 323, and inch cone-and-cup sets on request.
Special sourcing
Odd specs, imported machines and obsolete numbers are part of everyday work here. Send a part number, the three measurements or a photo, and we will come back with options, a price and a delivery time.
Also on request: Cylindrical roller, Needle roller, Self-aligning ball, Linear bearings, Stainless steel, Ceramic & hybrid, Inch / imperial sizes.
Brands
Plus other manufacturers on request.
Send it to us. We will tell you what it is, what it costs, and how soon it can be at your door.