Part number · Miniature & MR bearings
MR128 Bearing – 8 × 12 × 3.5 mm
MR128 miniature ball bearing. Available – ask for stock. Supplied in multiple brands, across India, with same or next-day delivery in Mumbai.
MR128 bearing price
Prices depend on brand and quantity, so we quote today’s rate. Send the quantity on WhatsApp and we reply during working hours with price and stock.
Available – ask for stock · Multiple brands
MR128 is a miniature ball bearing measuring 8 × 12 × 3.5 mm: 8 mm bore, 12 mm outside diameter and 3.5 mm width. The open version is 2.5 mm wide. We supply it open, or with rubber seals on both sides (2RS) for protection against dust and moisture.
In MR numbers the digits give the outside diameter first and then the bore: MR128 is 12 mm across with a 8 mm bore. Other 8 mm bore bearings in our special range: SSF608ZZ, 8×22×11 2RS, 8×22×6 2RS.
We supply the MR128 in multiple brands, from a single piece for a repair to bulk quantities, and can source more at short notice.
Why MR128 prices vary
- Genuine or copy: fakes sell far below the real price and fail early. We sell only genuine bearings.
- Version: sealed, shielded, C3, stainless and low-noise versions cost more than the open bearing.
- Quantity: bulk and repeat orders are priced lower.
So we quote today’s price for each brand rather than list one number. Ask for the MR128 price on WhatsApp.
MR128 dimensions
| Bore (d) | 8 mm |
|---|---|
| Outside diameter (D) | 12 mm |
| Width (B) | 3.5 mm (open: 2.5 mm) |
| Seals / shields | open or 2RS |
| Material | Chrome steel |
Also searched as
People write this bearing in different ways. All of these refer to the same 8 × 12 × 3.5 mm part:
Where the MR128 is used
Miniature ball bearings with bores of just a few millimetres, made to tight tolerances for small, fast-running parts.
- Small DC motors
- Printers & 3D printers
- RC models & drones
- Instruments & meters
- Dental & medical devices
- Fishing reels & hobby tools
Buying for a factory or workshop?
- GST invoice with every order
- One quotation for your whole list
- No minimum order
- Same or next-day delivery in Mumbai; dispatch across India
Read more: MR bearing size guide
Updated
Questions
MR128 bearing: frequently asked
What size is the MR128 bearing?
MR128 measures 8 × 12 × 3.5 mm (bore × outside diameter × width). The open version is 2.5 mm wide.
Is MR128 available?
Yes, MR128 is available – ask us for current stock. We supply it in multiple brands. Send the quantity on WhatsApp or through the quote form.
Have a part number, or just a worn-out bearing?
Send it to us. We will tell you what it is, what it costs, and how soon it can be at your door.