6213 Bearing – Size, Stock & Today’s Price

The 6213 is a light-series deep groove ball bearing with a 65 mm bore, a 120 mm outside diameter and a width of 23 mm. The 62 series is the everyday workhorse of deep groove bearings, balancing size and load capacity. It is the series most electric motors, pumps and gearboxes are built around.

Its last two digits, 13, multiplied by 5 give the 65 mm bore. A full designation such as 6213-2RS-C3 means a 6213 with rubber seals on both sides and C3 internal clearance, the usual choice for electric motors.

Sharing the same 65 mm bore are the 6013 (65 × 100 × 18 mm), the 6313 (65 × 140 × 33 mm), the 6813 (65 × 85 × 10 mm) and the 6913 (65 × 90 × 13 mm). They all fit a 65 mm shaft, but each needs a different housing, so check the outside diameter and width before you order.

Why 6213 prices vary

• Genuine or copy: fakes sell far below the real price and fail early. We sell only genuine bearings.
• Brand and origin: each maker, and each country of manufacture, is priced differently.
• Version: sealed, shielded, C3, stainless and low-noise versions cost more than the open bearing.
• Quantity: bulk and repeat orders are priced lower.

So we quote today’s price for each brand rather than list one number. Ask for the 6213 price on WhatsApp.

6213 dimensions

Dimensions are the ISO 15 standard size, the same in every brand and seal type.

6213 load and speed ratings

Figures for the open SKF 6213 from SKF’s online catalogue (checked 9 Oct 2026). Other brands publish slightly different ratings for the same size. Sealed (2RS) versions have a lower limiting speed. SKF data sheet.

Other bearings for a 65 mm shaft

Same bore, different series: a bigger bearing carries more load but needs a bigger housing.

On a 65 mm shaft, the 6213 carries 83% more load than the slimmer 6013, and the 6313 carries 67% more than the 6213, in a housing 20 mm larger across.

6213 variants

Every 6213 has the same outside dimensions. What changes is how it is sealed, its internal clearance and its material:

• 6213 (open): no shields or seals. For gearboxes and machines where oil or grease reaches the bearing.
• 6213 ZZ / 2Z: metal shields on both sides, greased for life. For clean, fast-running motors and fans.
• 6213 2RS: rubber seals on both sides (DDU at NSK, LLU at NTN). Better against dust and moisture.
• 6213 C3: internal clearance greater than normal, combined with any of the above (e.g. 6213-2RS-C3). The usual choice for electric motors.
• S6213 / SS6213: stainless steel for wet or corrosive conditions, usually marked with an S or SS prefix (SKF uses W). Supplied on request.

6213 equivalents by brand

Same size, written in each maker’s own style. Tap a brand to see how it numbers its bearings.

Where the 6213 is used

• Large electric motors
• Industrial pumps and compressors
• Gearboxes and reducers
• Conveyor drives
• Machine tools
• Crushers, mixers and process plant

Brands available for 6213

Is your 6213 genuine?

Counterfeit bearings are sold in many sizes and brands, including the 6213. Check that the marking on the ring matches the box exactly, that the brand’s own suffix style is used, and be wary of prices far below the market. How to spot a fake bearing.

Updated 18 October 2026